No spark from all 4 leads after engine being installed
#1
No spark from all 4 leads after engine being installed
Just received my version 5 engine... put the engine in and had to put my old inlet manifold on (as it didnt come with one) pluged everything up to how it should be and have double checked it over numorous amount of times and there is no spark from any 4 leads, i tryed taking the leads out and sticking a plug in and the ignition system doesnt seem to be working and for what reason i am unsure... its £60 to plug it in but if someone can come up with a explaination due to having new engine wether something needs to be reset or wether it is the imobiliser kicking in etc etc etc?
It had a version 5 in before aswel so nothing should be alien to the system
I have also replaced the crank sensor and still no luck
My old man seems to think it could be the imobiliser due to everything being unpluged for 2weeks
Many thanks
Your help will be much appreciated as it is driving me mad now!!
It had a version 5 in before aswel so nothing should be alien to the system
I have also replaced the crank sensor and still no luck
My old man seems to think it could be the imobiliser due to everything being unpluged for 2weeks
Many thanks
Your help will be much appreciated as it is driving me mad now!!
#2
check power to coil pack.
imobiliser is a poss but once battery is connected turn it off then it should allow a spark.
Is the timing correct for the crank sensor to operate correctly.
check feed to crank sensor incase you have a brake in the loom.
I will keep thinking mate, John
imobiliser is a poss but once battery is connected turn it off then it should allow a spark.
Is the timing correct for the crank sensor to operate correctly.
check feed to crank sensor incase you have a brake in the loom.
I will keep thinking mate, John
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM