markwalden

Hi all
Can anyone tell me the spec of a Andy forrest Td04 hybrid. I understand that the compressor wheel is changed and either the compressor housing changed or machined. The measurement i am most interested in is the compressor inlet internal diameter or the inducer diameter,i believe the standard inducer is 40.56mm. Any help appreciated

regards mark

markwalden

Bttt for Andy or anyone who has one

p1doc

email or ring andy himself,also check out his website as info is probably on his site
martin

WUZ

iTrader: (14)

If memory serves me right,

TD04 exhaust Housing and wheel, Machined Compressor housing, with a 16G Compressor wheel (From TD05 ) fitted.

CRACKING TURBO! - OE TD04 spoolup with a real kick in the backside.

markwalden

If only it was this easy,i have rung him for the last week leaving messages and emailed to his two email addresses

mark

1uke

iTrader: (2)

I emailed him about turbos a few days ago and also had no reply... Guess he's a busy chap atm!