jayparot

hey guys !!
PLEASE HELP ME

i did a swap TY752VB4CA now i have no DCCD controller for my tranny i live in CHILE and dont know where to buy one !! my car is a (impreza 2.0 GX AWD ) i swap a wrx sti V2 tranny and rear diff with motor and harnnes + ECU, but didnt get the controller...., now my car did have the connector for the wires but it does NOT work.

i went on DCCDpro.com they have one for 160.00 dollars but they dont shipp to CHILE .... NOW WHAT ???

anyone with a solution cus everytime i turn my car goes click click click and i can feel the diff being lock 100% if i disconected the wires will it un lock the diff ?
would it run OPEN ?

3barboost

try harder
there are lots of aftermarket dccd controllers or used oem ones
neetronics unit / dccdpro / ebay etc
you cant just give up and cry when one supplier doesnt want your cash
try david of apiimprezas on here - he can probably sort you out
or get an electronics person close to you to make up a unit
the circuitry is available if you try hard enough
i too live in a distant land and i dont cry when i meet the first obstacle

jayparot

hahahaha I'm NOT crying , but the thing is i drive the car everyday to work here i dought someone can built one if you where so kind to tell me how to find this people
i will get it from them .as to get EOM parts forget there is nothing here .....
if i unplug all the wires from the tranny will it work a bit better ?
thats just till i find someone to sell me what i need .

3barboost

the dccd is really simple
it just needs a 5v to 12v signal
the thumbroller postion is a voltage between those two
you could literally hook up a variable potentiometer and use that
it does need to be more scientific and do certain things under braking etc etc
but its not a tricky circuirt at all
get hold of david at apimprezas

jayparot

Thanks . will do