need everyones advice here
#1
need everyones advice here
hi guys, first thing first .. i need a windscreen for a classic 1999 turbo , some ****head cracked mine , i need a lambda and a cat temp sensor . i need to find somewhere that does wheel bearings fairly cheap , also can i fit a decat downpipe without a remap ? ... oh and lastly the most annoying of all ... front fogs .. tested the lamps..switch .. but no power going to the lights..relay ?.. if so where is it?
i know this is loads guys but thought i might get a better chance if its all in one go ...
thanks dudes and dudettes ....
i know this is loads guys but thought i might get a better chance if its all in one go ...
thanks dudes and dudettes ....
#4
I've got a 1999 Uk turbo which I had fully decatted with zero issues. I checked this out with a few scooby 'oracles' before going ahead, and was assured that (ON A CLASSIC!) this would be ok...obviously, a remap would be better to get the best gains.
Thread
Thread Starter
Forum
Replies
Last Post
fatboy_coach
General Technical
15
18 June 2016 03:48 PM
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM