Thermostatic plate for Oil Cooler
#1
Thermostatic plate for Oil Cooler
Does anyone know an oil cooler kit which comes with one supplied to fit the P1?
or know where i can get a good quality one to suppliement an oil cooler kit with?
or know where i can get a good quality one to suppliement an oil cooler kit with?
#3
Scooby Regular
iTrader: (11)
Join Date: Sep 2007
Location: leicester
Posts: 544
Likes: 0
Received 0 Likes
on
0 Posts
get yourself on e.bay mate there dead easy to fit if you have some basic tools a drill for mounting some brackets you need a cooler mabee a 14 row or bigger some mounting brackets on ebay for about 7 quid and the sandwich plate goes between the oil filter and the cooler on the car already you need the plate which comes with an m20 thread attachment to fit the plate
i found i needed a plate with a thermostat as i use a 25 row which i found took a while for the oil to get to temp and covered a 3rd of the rad up, so hot air was passing from that through the rad and the water temps would climb but since fitting the thermostat its been fine
i found i needed a plate with a thermostat as i use a 25 row which i found took a while for the oil to get to temp and covered a 3rd of the rad up, so hot air was passing from that through the rad and the water temps would climb but since fitting the thermostat its been fine
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM