After finally getting the engine back in we carnt seem to remember where the vac pipes go from the 2 port boost solenoid and the one above it i think map sensor ?
I have a dump valve and boost gauge tee'd off one of the 3 on the inlet the other one goes to the fuel reg that leaves one which i thought map sensor ? but then i have no where for the boost solenoid ?#
I have also fitted a front m ount cooler and front entry turbo which may explain the one hose as ive had to change the inlet pipe from maf to turbo ?
Any pics/links or advice thanks v-much

 

doesn't one go to the actuator?

 

Had another look i reckon the one from the side of the 2 port solenoid goes to the tee peice and pipe work which go from the turbo nipple and actuator but where does the bottom hos efrom the 2 port go ?

 

doesnt it go to the resonator box on the inlet.

 

which bits that ? bearing in mind i have front entry turbo and f/m ic now the 3 pipe take offs on the manifold are 1 for dumpvalve/boost gauge 2 fuel pressure reg and 3 map sensor but not sure if they all right ? helppppppppppp

 

Correct - but you can also leave it to VTA

 

Id look for you but mines locked in a garage 10 mmins walk up the road!

 

Cheers Tucker can you do some pics 2mrw of the boost sol hoses x2 and the map one pls

 

yeah sure - i'll get a couple up tomorrow for you.

 

I was just about to post the same thread up as done exactly the same. Very keen on knowing the outcome of this as well.

 

Come on guys get ya bonnets up pls

 

ive got to go to the garage now so I'll take some pics for you

 

Here goes:

from left to righgt on the inlet manifold:

First = tee'd for boost gauge and DV
second = Top right of map sensor

Third = left port on Fuel Reg

Throttle body = right port on Fuel reg

Top of 3 port boost sol = Actuator
Bottom side of boost sol = Turbo
Very bottom of boost sol = Resonator box

I hope this makes sense ... i'll add pics in a min

 

Sort of lol ill go and have a look :-))

Blackwrx i have though lol

 

 

mines a 95 wrx import so should be the same!

 

Looks the same Tucker :-)
Wheres that one go from the top of the throttle body ?
Many Thanks for your help m8

 

the one on the top of the throttle body goes to the fuel reg under the mainfold... along with the far right one on the manifold.

 

Your a star Tucker all plumbed in only diff was i got a 2 port solenoid so had 2 make the pipes up to a t piece from actuator to turbo nipple then up to boost sol top port the bottom one i just vented off
Cheers and beers

 

No problem