jasongtr

iTrader: (19)

as title

what cc injectors can handle what power

380cc
440cc
550cc

just need to know before i buy some

thanks

jasongtr

iTrader: (19)

anyone?

joz8968

iTrader: (13)

Scoobypedia | Trusted knowledge for everything Subaru | Knowledge / Estimated Horse Power from Injectors

The first column is relevent for the std Subaru FPR - 3bar

3.5bar is only achieveble with a replacement adjustable FPR...

jasongtr

iTrader: (19)

cheers, i nearly bought some 440's glad i didnt

joz8968

iTrader: (13)

Ha. I fell into the same trap! -since sold them on.

In the next few months, will be getting 550s instead (and obviously a FMIC) to achieve, hopefully, c.350/350 after a remap, on my new Zen engine (picked her up only yesterday)

jasongtr

iTrader: (19)

ill have TDo5 16g, decat exhaust, 550 injectors, walbro 255 fuel pump, hybrid fmic, and after a remap, what sort of power would i get, hoping for 300

WorkInProgress

yeah you'll get that maybe even a little more, but you will be push the car to the limit. i had 350 on my uk turbo and i had a simillar setup. but please take note that if you don't have strong internals expect a big bang and a large bill.

dynamix

iTrader: (3)

Injector size x 0.7 is a rough guide

joz8968

iTrader: (13)

You should get circa 350bhp with those mods... but your std internal'd motor may not be to pleased about it. Ditto gearbox.

jasongtr

iTrader: (19)

drive it til it blows then