also what is the boost pressure for sti blob eye prodrive? and what can the boost be turned up by with an adjustable boost controller? a couple of psi! with out a remap

 

the standard boost pressure is 1.1 bar im sure, the boost can be turned up without a map using a daws device but I would NOT reccomend that, the first map is a sore one but after that yeeehhhaaa
If you are thinking of upping the boost I would be thinking about getting a decent exhaust and induction (even if its a decent panel filter) and get a remap. For ECUTEC I think its about £500 - £550 + vat depending on mapper and any discounts available. For subsequent maps it depends on the work, but if a full remap is needed it is usualy £200ish + vat, just a tweek is usually less from what I have seen. For that you will see a decent increase in power and torque and for normal driving much better fuel economy too, even when I was running about 370 bhp I was getting better fuel consumption over standard as I once got about 320 - 330 miles to a full tank sitting at about 80mph

Hope this helps somewhat

Graeme

 

hi thanks for the info, ive got all the uprated kit fitted, full stainless zorst uprated fuel pressure regulator, induction kit, got a greddy prolific boost controller its set at 1 bar so say i adjust it to 1.3 im lucky to get 150 miles to a tank