What stage to FMIC?
Don't know why I asked that, as all UK's have TD04L's
- just that yours is front entry.
The limitng factor is your turbo mate - it runs out of puff at about the 280bhp mark (easily handled by your OEM v.5/6 WRX spec TMIC).
You have 440cc injectors fitted already which is nice. If you change your turbo for an easily swapped IHI VF34 or VF35 - THEN get the FMIC fitted - you'll then be able o get it mapped for about 330-350bhp from either of those turbos/injector combo.
So, I personally would only fit the FMIC when you get a bigger turbo - then remap the lot.
- just that yours is front entry.The limitng factor is your turbo mate - it runs out of puff at about the 280bhp mark (easily handled by your OEM v.5/6 WRX spec TMIC).
You have 440cc injectors fitted already which is nice. If you change your turbo for an easily swapped IHI VF34 or VF35 - THEN get the FMIC fitted - you'll then be able o get it mapped for about 330-350bhp from either of those turbos/injector combo.
So, I personally would only fit the FMIC when you get a bigger turbo - then remap the lot.
Trending Topics
Cheers joz8968, I am gonna be going for an uprated turbo and a few other goodies aswell, after much deliberation and reading threads I think I'm going to go with the VF35 for price and the spool up characteristics.
Now I need to source a good FMIC, I've seen quie a few on Ebay that start around 200 notes, do you rate these or would I have to go with a branded product, I want the most bang for my bucks as they say lol!!
Now I need to source a good FMIC, I've seen quie a few on Ebay that start around 200 notes, do you rate these or would I have to go with a branded product, I want the most bang for my bucks as they say lol!!
The most best value for money one is the Hybrid GT Spec. I think they are for sale on eBay from the far east and would be a little cheaper (assuming they're pukka!).
But I'd pay a little more and make sure you get a definite pukka item by buying from harvey. Contact him for all you'll need to know about what's required in fitting, air filter, dv, etc... Oh and prices.
But I'd pay a little more and make sure you get a definite pukka item by buying from harvey. Contact him for all you'll need to know about what's required in fitting, air filter, dv, etc... Oh and prices.
Thread
Thread Starter
Forum
Replies
Last Post




Do you have a contact number or Email address? 