where to tap in my new boost gauge
#1
Scooby Regular
Thread Starter
Join Date: Nov 2008
Location: nr york
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
where to tap in my new boost gauge
as above its a manual vacume gauge not electric which pipe do i tap my T peice into please pics appreciated
cheers guys
cheers guys
#2
Scooby Regular
Join Date: Jan 2006
Location: Cheltenham
Posts: 274
Likes: 0
Received 0 Likes
on
0 Posts
Afraid I haven't got a pic, but the normal place is the pipe coming off the top right of the blow off valve, as you look at it from the radiator. Details here:
http://www.wrxtra.com/Documentation/doc-1003.pdf
D
http://www.wrxtra.com/Documentation/doc-1003.pdf
D
#5
Scooby Regular
iTrader: (13)
You just might have a spare nipple on the inlet manifold. If so, simply run the narrow vac hose directly from there to the vac gauge (no T-piece required).
If all 3 nipples are in use, then tap the T-piece into the vac line that goes to the OEM black plastic recirc dump valve... The dv sits in-line between the TMIC and the turbo intake hose i.e. the black rubber-plastic 90-deg downturned hose after the MAF/2nd resonator.
If you have an aftermarket recirc or vta dv fitted, the same advice above applies.
Locate the T-piece as close as possible to the manifold end.
If all 3 nipples are in use, then tap the T-piece into the vac line that goes to the OEM black plastic recirc dump valve... The dv sits in-line between the TMIC and the turbo intake hose i.e. the black rubber-plastic 90-deg downturned hose after the MAF/2nd resonator.
If you have an aftermarket recirc or vta dv fitted, the same advice above applies.
Locate the T-piece as close as possible to the manifold end.
#6
Scooby Regular
iTrader: (13)
Got your PM. Try this link for the oil temp and pressure gauge fitments...
WRXtra
Also, 2 other threads currently running...
https://www.scoobynet.com/general-te...-pressure.html
https://www.scoobynet.com/general-te...ed-please.html
WRXtra
Also, 2 other threads currently running...
https://www.scoobynet.com/general-te...-pressure.html
https://www.scoobynet.com/general-te...ed-please.html
Last edited by joz8968; 24 December 2008 at 10:51 AM.
Thread
Thread Starter
Forum
Replies
Last Post