Injectors... A little help pls....
12 December 2008, 09:38 AM
#1
Scooby Regular
Thread Starter
Join Date: Oct 2008
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Injectors... A little help pls....
Can someone please point me on the right direction where to pull the plugs off each of my injectors on a 97 WRX.
Do i need to take off numerous other components to access the injectors like every other job on these engines?? ?? If so whats the best approach? Can it be done without other component removal?
Sry to sound like a rookie but hey... i've only had the scoob for a few weeks.
Cheers
Do i need to take off numerous other components to access the injectors like every other job on these engines?? ?? If so whats the best approach? Can it be done without other component removal?
Sry to sound like a rookie but hey... i've only had the scoob for a few weeks.
Cheers
12 December 2008, 05:51 PM
#2
Scooby Regular
Join Date: Sep 2007
Location: Stockholm, Sweden
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
On the right side of the car (looking forward) you need to unbolt the coollant reservoir and move i a bit to the side, you do not need to unplug it.
On the left hand side you need to unbolt the washer container and, again, move it up/aside, with no need to unplug anything.
I unplugged and changed all 4 injectors this way yesterday.
On the left hand side you need to unbolt the washer container and, again, move it up/aside, with no need to unplug anything.
I unplugged and changed all 4 injectors this way yesterday.
Thread
Thread Starter
Forum
Replies
Last Post