How do you clean the boost solenoid. classic car
25 November 2008, 11:49 AM
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Sep 2008
Posts: 550
Likes: 0
Received 0 Likes
on
0 Posts
How do you clean the boost solenoid. classic car
1995 wrx import
how do you clean the boost solenoid, and where exactly is it?
what is the best thing to use to clean it with?
might try cleaning the maf also, but know you have to be really careful with these as one on a fiat bravo got ruined just by lightly touching it. what would you clean the maf with?
how do you clean the boost solenoid, and where exactly is it?
what is the best thing to use to clean it with?
might try cleaning the maf also, but know you have to be really careful with these as one on a fiat bravo got ruined just by lightly touching it. what would you clean the maf with?
25 November 2008, 12:16 PM
#2
Scooby Regular
Join Date: Sep 2005
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
I cleaned mine yester day,
if you connect the two green wires underneath the drivers side dash and turn the ignition on it will actually make the solenoid click, then i just squirted brake cleaner/carb cleaner down all the ports. Then turn ignition off and disconnect the green connector under the dash. That should do it. You can also use brake cleaner or carb cleaner for the maf. Cheers
if you connect the two green wires underneath the drivers side dash and turn the ignition on it will actually make the solenoid click, then i just squirted brake cleaner/carb cleaner down all the ports. Then turn ignition off and disconnect the green connector under the dash. That should do it. You can also use brake cleaner or carb cleaner for the maf. Cheers
Thread
Thread Starter
Forum
Replies
Last Post
ossett2k2
Engine Management and ECU Remapping
15
23 September 2015 09:11 AM
