Mapping
#1
Scooby Regular
Thread Starter
Join Date: May 2007
Location: kent
Posts: 201
Likes: 0
Received 0 Likes
on
0 Posts
Mapping
I had some work done an my car was mapped again, not happy with the result at all!
Where abouts is there too go for a good map in the kent an south east london area. Dont wanna travel too far.
Also how much for the mapping (1994 import with power fc)
Where abouts is there too go for a good map in the kent an south east london area. Dont wanna travel too far.
Also how much for the mapping (1994 import with power fc)
#3
Scooby Regular
iTrader: (1)
Join Date: Aug 2005
Location: Manchester ish
Posts: 18,547
Likes: 0
Received 0 Likes
on
0 Posts
Jollygreenmonster is down Kent and is very good at the powerfc, I was more than happy when he mapped mine, and gave plenty of good advice and was never to busy to explain/suggest anything
#4
speak to bob rawle at brdevelopments, it is worth the trvel mate, top guy knows shed loads and takes the time out to explain too. woul dnnot take my car anywhere to anyone else after some issues with cars that i have bought which were mapped else wherwe, always had to have it back to him to sort it out. worth the travel costs
imho
imho
#6
www.jollygreenmonster.co.uk
He knows what he is doing and don't mind giving out advice either.
Top fella all round really.
He knows what he is doing and don't mind giving out advice either.
Top fella all round really.
#7
Scooby Regular
Thread Starter
Join Date: May 2007
Location: kent
Posts: 201
Likes: 0
Received 0 Likes
on
0 Posts
Before it would have a constant flow through revs, now it seems to get stuck an struggle then be ok for a slit second and get the problem again.
It happens in 3rd gear an onwards.
It's not as bar on the 0.8 bar setting compared to the 1.0 bar setting, (adjusted using avcr)
I had it worked on in that garage before an after the work it was underfueling badly as it was 260 atw on standard wrx injectors and that wasnt mapped properly. He excplained that he done what he could with the mapping and coulodnt do anymore until i had the fueling done.
I then had the fueling and mapping done with him. I went down the garage the day he had the fueling done and it wasnt finished so i went back the day after to collect after the mapping. But the car hadn't moved... i didnt think nothin of it at the time. Now i dont think he actually drove it anywhere or mapped it properly i think he just turned the fueling down.
Which aint too great being that it wasnt mapped properly from previous.
It happens in 3rd gear an onwards.
It's not as bar on the 0.8 bar setting compared to the 1.0 bar setting, (adjusted using avcr)
I had it worked on in that garage before an after the work it was underfueling badly as it was 260 atw on standard wrx injectors and that wasnt mapped properly. He excplained that he done what he could with the mapping and coulodnt do anymore until i had the fueling done.
I then had the fueling and mapping done with him. I went down the garage the day he had the fueling done and it wasnt finished so i went back the day after to collect after the mapping. But the car hadn't moved... i didnt think nothin of it at the time. Now i dont think he actually drove it anywhere or mapped it properly i think he just turned the fueling down.
Which aint too great being that it wasnt mapped properly from previous.
Trending Topics
#12
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM