ash002004

iTrader: (1)

Just wanna check there's no extra linkage or anything ill have to buy....as the car is in the garage now as i speak, and it needs new discs n pads all round for it to pass the MOT, so taking the opportunity to upgrade the front end brakes with some brembos and bigger discs

Jus wanna be 100% the brembos will go straight on and i dont have to mess about getting anything else? as i dont wanna complicate things further @ the garage, I jus want it all done and finished!

Thanks for any help in advance

TonyBurns

iTrader: (3)

They will fit but not under your standard alloy wheels!
Oh and ensure they are from an my01-my04 car and nothing later or they wont fit either!

Tony

daz1968

iTrader: (13)

get the bolts with them as well, I fitted a set to mine the only difference from wrx brakes was the discs, calipers and pads and the bolts to mount them, was M12 x 1.25 pitch by 35mm long if I remember correct, also make sure you use spring washers with them, and of course you need sti wheels or some after market ones that will clear the calipers. I was told 3mm spacers with standard wheels would work but decided against it.

ash002004

iTrader: (1)

Hi theyre from a guy on here if you click his view scooby link:

ScoobyNet - JB1

L555 reg may be a 55 plate or a private one?? hopefuly as you say its an 04 or below....or do you mean if its a 55 reg then it would be a hawkeye and completely different fitments?

Hopefully he'll have the bolts aswell, and got a set of pff7's in 18" sitting on the missus' upstairs landing that i never got round to fitting on my classic so the clearance isnt a problem thanks guys so far!

TonyBurns

iTrader: (3)

Its an MY03 so you should be ok there

Tony