j16jrf

iTrader: (3)

what size piston do i need to bore out to using a 75mm crank ona 2.0 to make it a 2.2?

thanks
Jamie

merlin24

iTrader: (1)

IIRC the bore size on the 22B was 96.90mm and with the 75mm stroke gave
a displacement of 2212cc.

Mick

j16jrf

iTrader: (3)

cheers Merlin, do you know who would do pistons to suit?

MartynJ

Lateral , RCM , Enginetuner to name a few...

Legacy_Turbo_EJ22G

Won`t be much meat left in the liners though if you bore out to 96.9mm. Should be lucky if anything at all. Go for another option.

Slowboy Racing

You wont be able to get the displace from a 2lt to 2.2 using the 2lt liners unless you use the 79mm crank with say 40thou oversize pistons and then you will still be off. This also would not be advisable with out a closed deck block imo.

j16jrf

iTrader: (3)

is on a cdb but gonna stick with 2.0 for the mean time lol

scoobysmiff

iTrader: (2)

get a 2.5 poolips

j16jrf

iTrader: (3)

haha no way 2.0 at the min maybe in a few years when i get bored i will do 2.5

but we all know the 2.5 is generally for poofs like you hahah