95 sti v2 turbo intake hose has a split i need a new one but am having problems!
#1
Scooby Regular
Thread Starter
#2
Scooby Regular
iTrader: (13)
FTR, I don't think Samco or any other hose company, ever made a v.1/2 pattern intake hose (more's the pity ).
Obviously you could use a regular silicone 90deg with the correct sized diameters and leg lengths but it will obviously lack the port for the OEM recirculating dump valve (not a prob if you get a VTA).
Moreover though, a regular 90deg hose obviously lacks the appropriate oil breather ports too. Damn.
Obviously you could use a regular silicone 90deg with the correct sized diameters and leg lengths but it will obviously lack the port for the OEM recirculating dump valve (not a prob if you get a VTA).
Moreover though, a regular 90deg hose obviously lacks the appropriate oil breather ports too. Damn.
#3
Scooby Regular
Thread Starter
FTR, I don't think Samco or any other hose company, ever made a v.1/2 pattern intake hose (more's the pity ).
Obviously you could use a regular silicone 90deg with the correct sized diameters and leg lengths but it will obviously lack the port for the OEM recirculating dump valve (not a prob if you get a VTA).
Moreover though, a regular 90deg hose obviously lacks the appropriate oil breather ports too. Damn.
Obviously you could use a regular silicone 90deg with the correct sized diameters and leg lengths but it will obviously lack the port for the OEM recirculating dump valve (not a prob if you get a VTA).
Moreover though, a regular 90deg hose obviously lacks the appropriate oil breather ports too. Damn.
Damm why do i get the feeling that this is going to be a trick part to find
suppose i better start looking for breakers for a 94/95 to get the part!
will the wrx 94/95 fit or will it need to be a sti.
i am guessing that any 94/95 import part will fit
#4
Scooby Regular
Thread Starter
95 sti v2 turbo intake hose has a split i need a new one but am having problems!
Some help plz i have a wrx sti v2 i have noticed a small split in what i think is the turbo intake hose, i want to replace it so i have been looking on ebay and have seen loads of silicon replacements but all of them say 96 ebay Item number: 200261639527
96-99 SUBARU IMPREZA WRX/STI TURBO AIR INTAKE SILICONE on eBay, also Engine Tuning Parts, Performance Tuning Parts, Car Tuning Styling, Cars, Parts Vehicles (end time 18-Oct-08 21:32:46 BST)
on and as my car is a 95 i am not sure if they will fit!
don't want to buy one if they don't i would consider buying the original part off someone if they have replaced there's, here is the image of the pipe i need.
any advice most appreciated.
96-99 SUBARU IMPREZA WRX/STI TURBO AIR INTAKE SILICONE on eBay, also Engine Tuning Parts, Performance Tuning Parts, Car Tuning Styling, Cars, Parts Vehicles (end time 18-Oct-08 21:32:46 BST)
on and as my car is a 95 i am not sure if they will fit!
don't want to buy one if they don't i would consider buying the original part off someone if they have replaced there's, here is the image of the pipe i need.
any advice most appreciated.
#6
Scooby Regular
iTrader: (13)
I recently replaced my original 15 year old one as the dump valve recirc port take-off had split (common failing as the dv causes it to bend over and gets stressed). I got mine from a breaker on eBay fro £20 delivered.
Check for 92-96 cars being broken on here... Plus eBay, where you'll find loads. Just enter subaru break* and impreza break*' and you 'trawl' in loads of ads lol . Then just fire off loads of eBay 'Ask the Seller' messages by keep on cutting and pasting your original messge (to save time), lol
Last edited by joz8968; 17 October 2008 at 09:45 PM.
#7
Scooby Regular
Thread Starter
Nice one mate i do use Boolean search !will have a look have been offered a samco red one which seems to be rare as rocking horse sh*t for a 95, but need to wait a week
Trending Topics
#9
Scooby Regular
Thread Starter
#10
Scooby Regular
iTrader: (2)
Join Date: Jul 2007
Location: stoke-on-trent
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts
it must be in the air because i just replaced mine tonight also due to the standard one splitting i priced one from subaru and after i picked my self up off the floor i decided to custom make one here it is, i got it from ebay Silicon Hose 90 degree Reducer 3"-2.5"/76mm-63mm Blue on eBay, also Engine Tuning Parts, Performance Tuning Parts, Car Tuning Styling, Cars, Parts Vehicles (end time 25-Oct-08 20:04:00 BST)
please measure your turbo neck and air pipe silencer to be sure of the size they do differ!
I have an fmic so its got a hks ssqv so i only had to drill 2 holes for the breather pipes they are a mega tight fit also sealed with sealer to be over sure its air tight her is some pics sorry about quallity its dark and its my camera phone
hope this is of help it looks better and saved me a bomb
please measure your turbo neck and air pipe silencer to be sure of the size they do differ!
I have an fmic so its got a hks ssqv so i only had to drill 2 holes for the breather pipes they are a mega tight fit also sealed with sealer to be over sure its air tight her is some pics sorry about quallity its dark and its my camera phone
hope this is of help it looks better and saved me a bomb
Last edited by mbd sti2; 17 October 2008 at 10:17 PM.
#12
Scooby Regular
Thread Starter
yeah thats awsome i could do that!
not sure what to do i have now been offerd 1 from some body on here for £25 which i guess would be my best bet,
but i could also get that pipe localy for £10-12 quid, question is will i do a good enogh job
not sure what to do i have now been offerd 1 from some body on here for £25 which i guess would be my best bet,
but i could also get that pipe localy for £10-12 quid, question is will i do a good enogh job
#14
Scooby Regular
iTrader: (2)
Join Date: Jul 2007
Location: stoke-on-trent
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts
sure you can manage a direct fit would be great they are so rare its untrue this works a treat and you got enough money to put about ten miles worth of fuel in to lol good luck with your choice
#15
Scooby Regular
Thread Starter
thank you for your time and effort! really appreciated,
#16
Scooby Regular
iTrader: (13)
#17
Scooby Regular
iTrader: (2)
Join Date: Jul 2007
Location: stoke-on-trent
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts
they dont call em main stealers for nothing £72.32 +vat thats what holdcroft subaru in stoke quoted me for bloody ruber hose as you can see i got 2 hoses one a 90 degree one the reducer 90 degree for £23 delivered over night cant moan at that
#18
Scooby Regular
iTrader: (2)
Join Date: Jul 2007
Location: stoke-on-trent
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts
there is nothing stoping you doing the dv recirc pipe mate the resonator delete pipe i made (i am a mechanic and fabricator) its the only good bit about the job i get to make bits to save money and its always labour free
#20
Scooby Regular
Thread Starter
Well after deciding to go for safe option of the original part, they guy has just taken it of his car and found it has a tear in it, so looks like i am going to go for the mbd sti2 solution,
what sealant did you use mbd ???
what sealant did you use mbd ???
#21
Scooby Regular
iTrader: (2)
Join Date: Jul 2007
Location: stoke-on-trent
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts
after marking the holes to be drilled with a marker pen i took it off to drill starting with a 10mm then going up to a 12mm this made it a very tight fit but i did use some wurth bond and seal which is the same as sikaflex the stuff you can bond spoilers on with in a body shop, silicon may do but this stuff dries a bit harder with more grip and strength hope this helps most good motor factors will sell it,
thanks to all who liked this mod
thanks to all who liked this mod
#23
Scooby Regular
Thread Starter
Ok I Orderd 2 hoses just in case!, i also got this hks induction kit
HKS (SPF) Air Filter Induction Kit Subaru Impreza 93-96 on eBay, also, Performance Tuning Parts, Car Tuning Styling, Cars, Parts Vehicles (end time 18-Oct-08 20:02:02 BST)
will fit it all on next week and let you know how i get on!
HKS (SPF) Air Filter Induction Kit Subaru Impreza 93-96 on eBay, also, Performance Tuning Parts, Car Tuning Styling, Cars, Parts Vehicles (end time 18-Oct-08 20:02:02 BST)
will fit it all on next week and let you know how i get on!
#24
Scooby Regular
iTrader: (2)
Join Date: Jul 2007
Location: stoke-on-trent
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts
glad i could help let me know how u get on with fitting it and get some pics up when its done i got some more pics done today in daylight this time
next on the list is a inlet manifold re-paint i think looks messy now
next on the list is a inlet manifold re-paint i think looks messy now
#25
Scooby Regular
Thread Starter
How difficult is it to re do the manifold would you take it of to do it or would you leave it on what sort of paint would you use ?
i like that plasti cote looking stuff so it looks all smooth and shiny
i really want to do this !!
i like that plasti cote looking stuff so it looks all smooth and shiny
i really want to do this !!
#26
Scooby Regular
iTrader: (13)
Last edited by joz8968; 18 October 2008 at 11:02 PM.
#27
Scooby Regular
iTrader: (2)
Join Date: Jul 2007
Location: stoke-on-trent
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts