Notices

only 0.6 bar boost ???????? help

Thread Tools
 
Search this Thread
 
Old 23 September 2008, 09:09 AM
  #1  
mad macca mccann
Scooby Regular
Thread Starter
 
mad macca mccann's Avatar
 
Join Date: May 2008
Location: lisburn northern ireland
Posts: 31
Likes: 0
Received 0 Likes on 0 Posts
Red face only 0.6 bar boost ???????? help

my car has been boosting at 1.1 bar since i got it (1996 sti import) i reversed the car the other day and hit the curb think it was the exshaust
since then the car has only been boosting at 0.6 and wont go higher checked all boost lines and bov for splits wastegate is fine now realy confused
anyone any ideas before it costs me a fortune in a garage for someone to tighten a frikin nut up (you know how some places are)
Old 23 September 2008, 10:50 AM
  #2  
ReggieMY99
Scooby Regular
 
ReggieMY99's Avatar
 
Join Date: Oct 2004
Posts: 670
Likes: 0
Received 0 Likes on 0 Posts
Default

Sounds like you car has gone into limp mode, the ecu protecting the engine because something is wrong, might be a sensor somewhere, do a ecu diagnose and see if it comes up with an error code

take a look here, howto read fault codes

Scoobypedia | Trusted knowledge for everything Subaru | Knowledge / Reading ECU Fault Codes

Last edited by ReggieMY99; 23 September 2008 at 10:52 AM.
Old 23 September 2008, 12:42 PM
  #3  
scoobynewbie72
Scooby Regular
iTrader: (1)
 
scoobynewbie72's Avatar
 
Join Date: Feb 2007
Location: Here
Posts: 1,605
Likes: 0
Received 0 Likes on 0 Posts
Default

also check the exhaust make sure there is no damage to restrict its breathing as this may cause it to go into limp mode in the first place
Old 23 September 2008, 06:50 PM
  #4  
andyxros
Scooby Regular
 
andyxros's Avatar
 
Join Date: Jul 2006
Location: huddersfield
Posts: 392
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by scoobynewbie72
also check the exhaust make sure there is no damage to restrict its breathing as this may cause it to go into limp mode in the first place
i.e cats not shatterd and blocking up the zaust whith the knock you say you have done (thats if it still has a cat lol)....this happened on a vactra i had and blew head gasket
Old 24 September 2008, 11:25 AM
  #5  
mad macca mccann
Scooby Regular
Thread Starter
 
mad macca mccann's Avatar
 
Join Date: May 2008
Location: lisburn northern ireland
Posts: 31
Likes: 0
Received 0 Likes on 0 Posts
Default

hi everyone done a ecu diagnose (thanks to reggie my99) and came up with code 23 maf sensor cercuit.
now is this the maf its self or the small sencer thats plumbed into the rubber maf elbow???? sory for the discription new at the scoobs
also going to check the cats today
Old 24 September 2008, 11:57 AM
  #6  
shogo10
Scooby Regular
iTrader: (1)
 
shogo10's Avatar
 
Join Date: Oct 2007
Location: Portsmouth
Posts: 403
Likes: 0
Received 0 Likes on 0 Posts
Default

You could try resetting the ecu using the black and green connectors under the dash
Old 24 September 2008, 01:34 PM
  #7  
mad macca mccann
Scooby Regular
Thread Starter
 
mad macca mccann's Avatar
 
Join Date: May 2008
Location: lisburn northern ireland
Posts: 31
Likes: 0
Received 0 Likes on 0 Posts
Default

happy days thanks for the help everyone reset the ecu as shogo10 suggested and works great back up to full boost
i is all happy again now can start to smile when tickleing throttle again
again thanks to all who responded so quickly
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
FuZzBoM
Wheels, Tyres & Brakes
16
04 October 2015 09:49 PM
psport
Subaru Parts
3
04 October 2015 07:35 PM
Ganz1983
Subaru
5
02 October 2015 09:22 AM
mistermexican
General Technical
2
01 October 2015 04:30 PM



Quick Reply: only 0.6 bar boost ???????? help



All times are GMT +1. The time now is 09:56 AM.