Can anyone recommend someone/somewhere that can install a NEETRONICS box
#1
Scooby Regular
Thread Starter
iTrader: (6)
Join Date: Apr 2005
Location: Stroke it baby!
Posts: 33,828
Likes: 0
Received 0 Likes
on
0 Posts
Can anyone recommend someone/somewhere that can install a NEETRONICS box
Will be swopping over my PPG 5 speed for a Jap 6 Speed with an additional DCCD centre dif. But will need to have a neetronics or similar box installed.
The box will be fitted at API however they wont do the electical side of it, can anyone recommend somewhere that will undertake this work.
The box will be fitted at API however they wont do the electical side of it, can anyone recommend somewhere that will undertake this work.
#2
Scooby Regular
Join Date: Jul 2000
Location: Lancashire
Posts: 2,209
Likes: 0
Received 0 Likes
on
0 Posts
I'm amazed they won't do it - it's a doddle, fitting takes maybe 1 - 1.5 hours.
I would have thought any Subaru specialist would happily do it.
Andrew...
I would have thought any Subaru specialist would happily do it.
Andrew...
#4
Scooby Regular
Join Date: Jul 2000
Location: Lancashire
Posts: 2,209
Likes: 0
Received 0 Likes
on
0 Posts
Neetronics manual here: http://www.neetronics.com/neet/image...anual_v107.pdf
Simple guide:
1. Mount the Neetronix box and the rotary switch somewhere convenient.
2. Connect (3) power and (2) ground wires to suitable sources.
3. Connect Power and Control wires to DCCD connector on gearbox (same connector as speed output)
* At this point you have a fully functional manual DCCD controller and can test it *
4. Connect TPS and Speed wires at ECU
5. Connect Foot and Hand brake wires to exisiting switches.
I honestly did mine in a lunchtime, I've posted pictures on here before.
Andrew...
Simple guide:
1. Mount the Neetronix box and the rotary switch somewhere convenient.
2. Connect (3) power and (2) ground wires to suitable sources.
3. Connect Power and Control wires to DCCD connector on gearbox (same connector as speed output)
* At this point you have a fully functional manual DCCD controller and can test it *
4. Connect TPS and Speed wires at ECU
5. Connect Foot and Hand brake wires to exisiting switches.
I honestly did mine in a lunchtime, I've posted pictures on here before.
Andrew...
#5
Scooby Regular
Thread Starter
iTrader: (6)
Join Date: Apr 2005
Location: Stroke it baby!
Posts: 33,828
Likes: 0
Received 0 Likes
on
0 Posts
Neetronics manual here: http://www.neetronics.com/neet/image...anual_v107.pdf
Simple guide:
1. Mount the Neetronix box and the rotary switch somewhere convenient.
2. Connect (3) power and (2) ground wires to suitable sources.
3. Connect Power and Control wires to DCCD connector on gearbox (same connector as speed output)
* At this point you have a fully functional manual DCCD controller and can test it *
4. Connect TPS and Speed wires at ECU
5. Connect Foot and Hand brake wires to exisiting switches.
I honestly did mine in a lunchtime, I've posted pictures on here before.
Andrew...
Simple guide:
1. Mount the Neetronix box and the rotary switch somewhere convenient.
2. Connect (3) power and (2) ground wires to suitable sources.
3. Connect Power and Control wires to DCCD connector on gearbox (same connector as speed output)
* At this point you have a fully functional manual DCCD controller and can test it *
4. Connect TPS and Speed wires at ECU
5. Connect Foot and Hand brake wires to exisiting switches.
I honestly did mine in a lunchtime, I've posted pictures on here before.
Andrew...
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM