Q45 MAF
Thread Starter
Joined: Jan 2007
Posts: 737
Likes: 0
From: www.somersetscoobys.co.uk
Q45 MAF
Hello there can anyone tell me how to wire in the nissan q45 maf to my 95 wrx, tried the search and found how to wire the z32, is this the same??
Scooby Regular
iTrader: (2)
Joined: May 2000
Posts: 8,626
Likes: 1
From: Class record holder at Pembrey Llandow Goodwood MIRA Hethel Blyton Curborough Lydden and Snetterton
This is from memory
My Q45 has 3 pins, some have 5.
The pins are labelled B, D, and E
B = 0-5V signal
D = Minus/Ground
E = +12Vdc
On your loom (MY93-96?) IIRC theres more than 3 wires, its 4 or possibly 5. Theres at least 2 ground wires anyway. Cut the loom back a few inches and you'll see a shielded cable with 3 wires in it - use these and safe up the other one (or2) IIRC the wires will be red, black and one other - white I think
Red is 12V
Black is ground
Other one is signal.
I have a 3 pin Q45 surpless to requirements if anyone needs one.
My Q45 has 3 pins, some have 5.
The pins are labelled B, D, and E
B = 0-5V signal
D = Minus/Ground
E = +12Vdc
On your loom (MY93-96?) IIRC theres more than 3 wires, its 4 or possibly 5. Theres at least 2 ground wires anyway. Cut the loom back a few inches and you'll see a shielded cable with 3 wires in it - use these and safe up the other one (or2) IIRC the wires will be red, black and one other - white I think
Red is 12V
Black is ground
Other one is signal.
I have a 3 pin Q45 surpless to requirements if anyone needs one.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
Dec 28, 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
Nov 18, 2015 07:03 AM