adamhodges

I have just purchased a 1995 subaru turbo wagon,its uk spec,Ive put a induction kit on it and a twin piston dump valve,if i remove that pill and install a manual bleed valve,will i be able to up the boost,any1 no the limits and what performance level this will gain,many thanks adam

Peanuts

iTrader: (15)

you need a dawes device, a boost gauge and a set of detcans at the very least.
should be able to go to 1.1bar which will next you about 25bhp

Bats-Wrx

iTrader: (1)

Fit a full de-cat exhaust. Should see a pony or two.

cookstar

iTrader: (6)

Start saving for a rebuild as well.

rob73

just buy an off the shelf chip its cheap and much safer than messing around like your gonna do,did my 95 wagon and was showing 242bhp 236ft/lbs with good afr. chip was £150.

Shmerman

iTrader: (14)

Get a sports car/decat then take it to a mapper that can do a custom map on a ESL board for you.....much safer with better gains.