Secondary fuel surge hose / apexi induction kit?
#1
Scooby Newbie
Thread Starter
Join Date: Nov 2006
Location: Norway
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Secondary fuel surge hose / apexi induction kit?
I've just fitted an Apexi induction kit to my MY94, and I'm wondering if it's OK to connect the tube "secondary surge" from the fuel "box" in the front of the car, to the bleed valve from the boost solenoid.
I'm not quite sure if that's the right way to explain it, but I've added some pictures so it's easier to understand.
The original place where the hose was connected: (this 90 degree is now gone)
The hose from the fuel "box":
The "bleed" hose from the boost solenoid:
The only "outlet" on the new induction kit
It it safe to connect those 2 hoses with a T-connector and then connect it to the induction?
I'm not quite sure if that's the right way to explain it, but I've added some pictures so it's easier to understand.
The original place where the hose was connected: (this 90 degree is now gone)
The hose from the fuel "box":
The "bleed" hose from the boost solenoid:
The only "outlet" on the new induction kit
It it safe to connect those 2 hoses with a T-connector and then connect it to the induction?
#2
Scooby Newbie
Thread Starter
Join Date: Nov 2006
Location: Norway
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Seems a T there would do no good
It's just a breather hose from the carbon canister, which is Useless(?) and can be vented into atmo
see thread here:https://www.scoobynet.com/general-te...bit-stuck.html
Does this mean that the hose from the boost solenoid can be vented into atmo as well?
It's just a breather hose from the carbon canister, which is Useless(?) and can be vented into atmo
see thread here:https://www.scoobynet.com/general-te...bit-stuck.html
Does this mean that the hose from the boost solenoid can be vented into atmo as well?
Thread
Thread Starter
Forum
Replies
Last Post
MightyArsenal
Wheels, Tyres & Brakes
6
25 September 2015 08:31 PM