how to get a burble from my sport
#1
how to get a burble from my sport
hi there ive alway loved scoobys from when they 1st came out.being only 23 i carn't afford the running costs of a turbo nor insurance so i got a sport wrx replica the only thing you can tell is the sound and need some help to get that famous burble i no it wont be as loud but anything resembling a wrx would be nice.
cheers
cheers
#6
easiest way is to fit a ninja (or similar) back box and center pipe, will give a nice burble, or get a borla manifiold from ebay and that will do the trick. had the borla, center straight thru pipe and a prodrive back box on and it sounds just nice, with both cats removed was a bit loud, and with both cats removed and the ninja back box it gave me a headache if driven for more than 20mins.
no the wrx headers wont fit.
no the wrx headers wont fit.
Trending Topics
#8
Scooby Regular
Join Date: Dec 2006
Location: Burton on Trent
Posts: 305
Likes: 0
Received 0 Likes
on
0 Posts
in a turbo scooby, its purely the unequal length of the manifold to the turbo that gives the burble..so you wil need one pipe slightly longer than the other going to your centre section to achieve the burble.
look on youtube..im sure ive seen some sports on there sound JUST like a turbo..and borla rings a bell for the manifold(also called headers)
hope that helps.
look on youtube..im sure ive seen some sports on there sound JUST like a turbo..and borla rings a bell for the manifold(also called headers)
hope that helps.
#10
Scooby Regular
Join Date: Nov 2003
Location: Hampshire
Posts: 379
Likes: 0
Received 0 Likes
on
0 Posts
Try asking on
.:ImprezaSport.net:. quite a few have swapped to the Borla manifold on there and will be able to give you some more advice
.:ImprezaSport.net:. quite a few have swapped to the Borla manifold on there and will be able to give you some more advice
Thread
Thread Starter
Forum
Replies
Last Post