Boost Control Solenoid
30 May 2008, 08:17 PM
#1
Boost Control Solenoid
I have a Bugeye STI JDM.
Some one in the past has fitted a tripple port Boost Control Solenoid and am going to fit a twin port again.
The tripple port solenoid has 3 pipe going to it.
1 from the turbo actuator.
1 frome the turbo compresser housing.
and 1 from the Air intake pipe.
Which one of these go else where and where does it go.
Could some one also tell me which way round the 2 wires go as the past owner has cut the plug off so i have no idea which way round they go.
Cheers
Andy
Some one in the past has fitted a tripple port Boost Control Solenoid and am going to fit a twin port again.
The tripple port solenoid has 3 pipe going to it.
1 from the turbo actuator.
1 frome the turbo compresser housing.
and 1 from the Air intake pipe.
Which one of these go else where and where does it go.
Could some one also tell me which way round the 2 wires go as the past owner has cut the plug off so i have no idea which way round they go.
Cheers
Andy
31 May 2008, 08:25 PM
#3
Scooby Regular
Join Date: Apr 2008
Location: Herts
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
31 May 2008, 09:21 PM
#5
Scooby Regular
Join Date: Apr 2008
Location: Herts
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
No worries mate. I've had one of hell of a day sorting out my hoses as previous owner fitted a manual boost controller and that was even fitted wrongly. Got it connected back to boost solenoid now and it drives much better.
Thread
Thread Starter
Forum
Replies
Last Post