Newage Hybrid FMIC pipework help!!
25 May 2008, 09:03 PM
#1
Scooby Regular
Thread Starter
Join Date: Mar 2008
Location: Lincoln
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Newage Hybrid FMIC pipework help!!
Guys,
There must be somebody out there that has some pictures of the hot and cold pipework routing of the later style new-age hybrid to help me out of a hole!!!
I have the inter-cooler core mounted, and i'm pretty sure i have the cold side, along with the CAK fitted correctly. I have 4 pieces left, 1 of which connects to the turbo outlet and runs down the back of the engine towards the chasis. I'm now having a 'mare trying to link the rest of the hot side to the core. I have either fitted the cold side incorrectly, or i'm thinking that one of the pipes has been welded 90 deg out.
Cheers
Stu
There must be somebody out there that has some pictures of the hot and cold pipework routing of the later style new-age hybrid to help me out of a hole!!!
I have the inter-cooler core mounted, and i'm pretty sure i have the cold side, along with the CAK fitted correctly. I have 4 pieces left, 1 of which connects to the turbo outlet and runs down the back of the engine towards the chasis. I'm now having a 'mare trying to link the rest of the hot side to the core. I have either fitted the cold side incorrectly, or i'm thinking that one of the pipes has been welded 90 deg out.
Cheers
Stu
Thread
Thread Starter
Forum
Replies
Last Post
hedgecutter
General Technical
3
25 September 2015 02:35 PM