track rod????
#3
Scooby Regular
iTrader: (2)
Join Date: Jan 2004
Location: Hertfordshire
Posts: 4,312
Likes: 0
Received 0 Likes
on
0 Posts
Thats the steering rack gaitor. Fairy easy to change. Remove track rod end and locking nut. slide old gaitor off and new one on replace clips(cable ties) bolt track rod end back on. Will require the tracking checked after youve done it as its almost imposible to get it back in exactly the same spot.
When the old gaitor is off check that no dirt or grit etc has got into the rack. clean if needed probably worth re-greasing as a matter of course
When the old gaitor is off check that no dirt or grit etc has got into the rack. clean if needed probably worth re-greasing as a matter of course
Last edited by Turbotits; 20 March 2008 at 10:30 PM.
#4
Scooby Regular
Thread Starter
Join Date: Aug 2007
Location: newcastle
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
thanks for that, how much shud this move if at all? i can twist it and its knockin quite a bit. other side moves but not as much. cud this just be down to no grease in it? or cud it just be the track rod end?
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM