engine stalling? 5k revs
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Nov 2007
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
engine stalling? 5k revs
just back from the cinema and my newage wrx seems to be chocking/stalling at 5k. it powers through the revs up this point when it starts to 'choke' and doesnt want to go any further through the revs. this happens in every gear. drives sweet other than that ie if a didnt reach these revs i wouldnt know there was an issue.
all the mods that are req for an Andy F stage one map are fitted if this helps
this happen to anyone else? common fault? any ideas?
all the mods that are req for an Andy F stage one map are fitted if this helps
this happen to anyone else? common fault? any ideas?
#3
Scooby Regular
Join Date: Dec 2002
Location: devon
Posts: 2,944
Likes: 0
Received 0 Likes
on
0 Posts
so it's got mods but not mapped yet ?
that's your problem, it's hitting fuel cut, it's running wrong so the ecu is cutting it back.
andy will sort it on the map but ffs go steady till he's seen it or you'll paying alot more for a rebuild.
what mods has it got so far then ????
that's your problem, it's hitting fuel cut, it's running wrong so the ecu is cutting it back.
andy will sort it on the map but ffs go steady till he's seen it or you'll paying alot more for a rebuild.
what mods has it got so far then ????
#5
Scooby Regular
Join Date: Dec 2002
Location: devon
Posts: 2,944
Likes: 0
Received 0 Likes
on
0 Posts
or maf sensor or leaky pipe/hose (turbo,intercooler,bov areas) , could be a number of things bud , how close are you to andy ?
could be worth PM'ing him , he'll probably be along in a bit anyway.
certainly sounds like fuel cut though , go steady till you've got it sorted though
could be worth PM'ing him , he'll probably be along in a bit anyway.
certainly sounds like fuel cut though , go steady till you've got it sorted though
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM