Q for apexi power fc owners/mappers..
#1
Q for apexi power fc owners/mappers..
When the boost is being set up does it use the oem boost solenoid....just that i have a greddy ebc and was told i wont need it anymore as the ecu will control it
thing is i had an intermittent boost prob with the oem set up and wondering if the apexi may be able to overcome it, if not then id wanna keep the greddy as it had cured it
thanks
Barry
thing is i had an intermittent boost prob with the oem set up and wondering if the apexi may be able to overcome it, if not then id wanna keep the greddy as it had cured it
thanks
Barry
#2
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
on your car (a 99) you have a 2port boost solenoid which is better swapped for a 3port boost solenoid.
If you already have an EBC fitted and are happy with it then I would be inclined to leave that controlling the boost. The Apexi can still use the original MAP sensor to enable fuel cut should it overboost and there is no issue keeping the EBC.
Simon
If you already have an EBC fitted and are happy with it then I would be inclined to leave that controlling the boost. The Apexi can still use the original MAP sensor to enable fuel cut should it overboost and there is no issue keeping the EBC.
Simon
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM