from 1.45 to 1.6 bar ( normal or not)
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Jun 2007
Location: Cyprus
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
from 1.45 to 1.6 bar ( normal or not)
I have recently fitted a greddy pe II catback exhaust and now my car runs at about 1.5-1.6 bar instead of 1.45 that used to run with the stock exhaust... the car has no other mods but i have an sti panel filter waiting to be fitted... will i have any problem in the long term running like this or is everything normal?also should i fit the filter or would i make my car run lean... i can't do a reamp in my country , and the only solution that i have is really expensive( HKS Fcon V-Pro).. it cost about £1600 fitted and programmed etc... so do i really need a new ecu or is the car ok running like this?
btw tha car is a jdm sti my06 and recently made 315ps and 423nm with the catback exhaust but without the sti pnale filter on the dyno if this is of any help...
btw tha car is a jdm sti my06 and recently made 315ps and 423nm with the catback exhaust but without the sti pnale filter on the dyno if this is of any help...
Last edited by charis_sti; 03 January 2008 at 05:22 PM.
#2
Scooby Regular
Join Date: Dec 2006
Location: at the petrol station again!!!
Posts: 1,213
Likes: 0
Received 0 Likes
on
0 Posts
I have recently fitted a greddy pe II catback exhaust and now my car runs at about 1.5-1.6 bar instead of 1.45 that used to run with the stock exhaust... the car has no other mods but i have an sti panel filter waiting to be fitted... will i have any problem in the long term running like this or is everything normal?also should i fit the filter or would i make my car run lean... i can't do a reamp in my country , and the only solution that i have is really expensive( HKS Fcon V-Pro).. it cost about £1600 fitted and programmed etc... so do i really need a new ecu or is the car ok running like this?
btw tha car is a jdm sti my06 and recently made 315ps and 423nm with the catback exhaust but without the sti pnale filter on the dyno if this is of any help...
btw tha car is a jdm sti my06 and recently made 315ps and 423nm with the catback exhaust but without the sti pnale filter on the dyno if this is of any help...
if you start removing cats then it will need mapping,but as it is now should be ok in my opinion,but if wrong i am sure someone will correct me.
#4
Drop Andy Forrest a mail, pretty sure I have heard of him mapping cars in Cyprus occasionally.
info@andyforrestperformance.co.uk
info@andyforrestperformance.co.uk
Thread
Thread Starter
Forum
Replies
Last Post
fatboy_coach
General Technical
15
18 June 2016 03:48 PM