|
from 1.45 to 1.6 bar ( normal or not)
I have recently fitted a greddy pe II catback exhaust and now my car runs at about 1.5-1.6 bar instead of 1.45 that used to run with the stock exhaust... the car has no other mods but i have an sti panel filter waiting to be fitted... will i have any problem in the long term running like this or is everything normal?also should i fit the filter or would i make my car run lean... i can't do a reamp in my country , and the only solution that i have is really expensive( HKS Fcon V-Pro).. it cost about £1600 fitted and programmed etc... so do i really need a new ecu or is the car ok running like this?
btw tha car is a jdm sti my06 and recently made 315ps and 423nm with the catback exhaust but without the sti pnale filter on the dyno if this is of any help... |
Originally Posted by charis_sti
(Post 7528082)
I have recently fitted a greddy pe II catback exhaust and now my car runs at about 1.5-1.6 bar instead of 1.45 that used to run with the stock exhaust... the car has no other mods but i have an sti panel filter waiting to be fitted... will i have any problem in the long term running like this or is everything normal?also should i fit the filter or would i make my car run lean... i can't do a reamp in my country , and the only solution that i have is really expensive( HKS Fcon V-Pro).. it cost about £1600 fitted and programmed etc... so do i really need a new ecu or is the car ok running like this?
btw tha car is a jdm sti my06 and recently made 315ps and 423nm with the catback exhaust but without the sti pnale filter on the dyno if this is of any help... if you start removing cats then it will need mapping,but as it is now should be ok in my opinion,but if wrong i am sure someone will correct me. |
Can you not get a prodrive pack sent over?
|
Drop Andy Forrest a mail, pretty sure I have heard of him mapping cars in Cyprus occasionally.
info@andyforrestperformance.co.uk |
| All times are GMT +1. The time now is 06:38 AM. |
© 2024 MH Sub I, LLC dba Internet Brands