One for the APEXi Commander Experts
#1
Scooby Regular
Thread Starter
iTrader: (3)
Join Date: Dec 2005
Location: South Wales
Posts: 483
Likes: 0
Received 0 Likes
on
0 Posts
One for the APEXi Commander Experts
Hi
Does anyone know what the normal readings onthe commander are for the O2 sensor, mine stays static at about 0.08 at idle and then jumps up to about 0.9 when you blip the throttle.
I've turned the lambda off as per instructions and its about the same 0.12 under idle then under load moves up to 0.98 and stays around that until I lift off.
Not even sure if the readings would/should be different.
Car drives the same not accelerating when it comes on boost hesitating and not making any more then minimal boost pressure, with the Lambda on or off.
Thanks for any help
Jon
Does anyone know what the normal readings onthe commander are for the O2 sensor, mine stays static at about 0.08 at idle and then jumps up to about 0.9 when you blip the throttle.
I've turned the lambda off as per instructions and its about the same 0.12 under idle then under load moves up to 0.98 and stays around that until I lift off.
Not even sure if the readings would/should be different.
Car drives the same not accelerating when it comes on boost hesitating and not making any more then minimal boost pressure, with the Lambda on or off.
Thanks for any help
Jon
Thread
Thread Starter
Forum
Replies
Last Post
Mister:E
Subaru Parts
2
24 September 2015 01:37 PM
The Joshua Tree
Computer & Technology Related
18
11 September 2015 09:24 PM