Boost gauges for MY01
10 January 2002, 07:01 AM
#1
Scooby Regular
Thread Starter
Join Date: May 2000
Location: MY00,MY01,RX-8, Alfa 147 & Focus ST :-)
Posts: 10,371
Likes: 0
Received 0 Likes
on
0 Posts
Hi
Just thinking about putting one of these in. Anyone got any pictures showing one fitted to the A pillar (or anywhere else for that matter). I was thinking about Defi, but any other ideas welcome.
Chris
Just thinking about putting one of these in. Anyone got any pictures showing one fitted to the A pillar (or anywhere else for that matter). I was thinking about Defi, but any other ideas welcome.
Chris
11 January 2002, 05:07 PM
#4
Scooby Regular
Thread Starter
Join Date: May 2000
Location: MY00,MY01,RX-8, Alfa 147 & Focus ST :-)
Posts: 10,371
Likes: 0
Received 0 Likes
on
0 Posts
Hi Simon
Been thinking about the full pack, although I might just have a boost gauge- - not sure yet.
As regards the car, so far I've done the headlamps - Morrette with HID, Prodrive quickshift and Prodrive backbox. Eibachs were fitted today by Powerstation. You will not regret it - very worthwhile. Big improvement to handling and steering seems to have a little more feedback. Car is sitting nicely lower - about 15mm at the moment - it should settle down by another 10mm or so over the next few days. It looks a lot better now
Things still to do... Rallytech spolier should be going on in the next week or so and maybe some slight window tints - nothing too dark.
Oh yes, and a trip to Scoobysport for an exhaust
Cheers
Chris
Been thinking about the full pack, although I might just have a boost gauge- - not sure yet.
As regards the car, so far I've done the headlamps - Morrette with HID, Prodrive quickshift and Prodrive backbox. Eibachs were fitted today by Powerstation. You will not regret it - very worthwhile. Big improvement to handling and steering seems to have a little more feedback. Car is sitting nicely lower - about 15mm at the moment - it should settle down by another 10mm or so over the next few days. It looks a lot better now
Things still to do... Rallytech spolier should be going on in the next week or so and maybe some slight window tints - nothing too dark.
Oh yes, and a trip to Scoobysport for an exhaust
Cheers
Chris
01 October 2002, 11:00 AM
#5
Scooby Regular
Join Date: Oct 2000
Location: Surrey, UK
Posts: 8,384
Likes: 0
Received 0 Likes
on
0 Posts
You have mail mate
re: http://www.scoobynet.co.uk/bbs/threa...d=61370&Page=2
[Edited by DrEvil - 1/10/2002 11:01:30 AM]
re: http://www.scoobynet.co.uk/bbs/threa...d=61370&Page=2
[Edited by DrEvil - 1/10/2002 11:01:30 AM]
01 October 2002, 11:10 PM
#6
Scooby Regular
Join Date: May 2000
Posts: 625
Likes: 0
Received 0 Likes
on
0 Posts
Chris,
The Defi centre gauge pack is fantastic, if you don't like the carbon from Nitosport NAM do them in ordinary placky for 450 notes, which is the one I have. Cheam fitted it for me no probs.
Every time I get in the car and turn it on and see the startup sequence I grin (followed by another one when I start it up and hear the noise from the SS/prodrive exhaust).
Lost track, what you had done to your motor so far?
Mines off to TSL on Monday for their Morettes and Eibachs.
Cheers
Edited for spooling
and again X 2
Simon
[Edited by simes - 1/10/2002 11:12:06 PM]
[Edited by simes - 1/10/2002 11:13:15 PM]
[Edited by simes - 1/10/2002 11:14:14 PM]
The Defi centre gauge pack is fantastic
, if you don't like the carbon from Nitosport NAM do them in ordinary placky for 450 notes, which is the one I have. Cheam fitted it for me no probs.Every time I get in the car and turn it on and see the startup sequence I grin (followed by another one when I start it up and hear the noise from the SS/prodrive exhaust)
.Lost track, what you had done to your motor so far?
Mines off to TSL on Monday for their Morettes and Eibachs
.Cheers
Edited for spooling
and again X 2 Simon
[Edited by simes - 1/10/2002 11:12:06 PM]
[Edited by simes - 1/10/2002 11:13:15 PM]
[Edited by simes - 1/10/2002 11:14:14 PM]
Thread
Thread Starter
Forum
Replies
Last Post