Problem after 1/4mile 1994 wrx
#1
Problem after 1/4mile 1994 wrx
Hya,
I went to York Race Way today and done a good time 13.9, it pulled really well. On my way home it made a noise a bit like a boost leak, and now wont boost at all the gauge only slightly goes past 0 bar, I have had the intercooler off and checked all pipes carnt see any splits the turbines in the turbo seem nice a free.
Iam stumped it was going so well any suggestions please?
Could it be the boost solinoid how would I check?
Thanks mark
I went to York Race Way today and done a good time 13.9, it pulled really well. On my way home it made a noise a bit like a boost leak, and now wont boost at all the gauge only slightly goes past 0 bar, I have had the intercooler off and checked all pipes carnt see any splits the turbines in the turbo seem nice a free.
Iam stumped it was going so well any suggestions please?
Could it be the boost solinoid how would I check?
Thanks mark
#4
I have checked the pipe to the boost gauge all is ok, carnt see no plits any where I have noticed the exhaust is blowing abit could this be the problem ?
Thanks mark
Thanks mark
Trending Topics
#10
Hya,
I only had it welded a few weeks ago so hopes so mate, Are you the fella who blitzed me on the strip, if so I got talking to you, what was your best on the day bud?
mark
I only had it welded a few weeks ago so hopes so mate, Are you the fella who blitzed me on the strip, if so I got talking to you, what was your best on the day bud?
mark
#11
Scooby Regular
iTrader: (6)
I would get the welds checked , The smallest leak would be a proplem. Or get a sti top mount , Job done . or even a front mount , LoL hope you get it sorted, >> And yes it was me that pipped you to the post , my times yesterday were not my best to date 12.0 @ 117mph. cheers Alan.
#12
Cheers mate,
I will strip it and check, Your times are excellent even if there are not your best, hopefully one day I might do a 12sec 1/4mile in my subaru lol, I will need a pay rise first .
Cheers mark
I will strip it and check, Your times are excellent even if there are not your best, hopefully one day I might do a 12sec 1/4mile in my subaru lol, I will need a pay rise first .
Cheers mark
#14
Hya,
Just thought, How would a change of intercooler solve it I am probably been stupid but I was on about the welds on the up pipe to the turbo mate, surely this pipe would stop regardless or would it? I feel daft now
Cheers mark
Just thought, How would a change of intercooler solve it I am probably been stupid but I was on about the welds on the up pipe to the turbo mate, surely this pipe would stop regardless or would it? I feel daft now
Cheers mark
#15
Scooby Regular
iTrader: (2)
Join Date: Jan 2004
Location: Hertfordshire
Posts: 4,312
Likes: 0
Received 0 Likes
on
0 Posts
Think he's talking about the seems in the top mount and assumed you had had the re-welded which i also did until i read your last post.
As said check the end tank seal on the top mount. They do blow apart
#17
Hya,
I just thought it would be right to let you know the cause of my problem was a loose jubilee clip, It felt tight by hand but when I put abit of pressure on it with a rachet it clicked so re-placed it looks to be ok now, I feel like a right dill lol,
Just the exhaust gaskets to sort now.
thanks mark
I just thought it would be right to let you know the cause of my problem was a loose jubilee clip, It felt tight by hand but when I put abit of pressure on it with a rachet it clicked so re-placed it looks to be ok now, I feel like a right dill lol,
Just the exhaust gaskets to sort now.
thanks mark
#19
Hya,
No mate mine was the L reg white wrx, not sure about power I have just got the car I know its an import with 240 ps it has a de-cat but not sure if its been chipped I dont think it has.
cheers mark
No mate mine was the L reg white wrx, not sure about power I have just got the car I know its an import with 240 ps it has a de-cat but not sure if its been chipped I dont think it has.
cheers mark
Thread
Thread Starter
Forum
Replies
Last Post
domu
ScoobyNet General
7
03 October 2015 03:46 AM