Problem with APEXI COMMANDER
#1
Problem with APEXI COMMANDER
this has happened a few times now, and i have just got on with it, but it has been like it for around 2 days now, where as before it uses to come and go with no pattern.
the problem i get is the display fades in and out, so where you have all the display in black with the green back lit display, the black fades out so you cant see it.
some times it fads a few shades darker, then returns to normal, sometimes it goes so you cant see it at all.
i have tried replugging it back into the ecu, all the pins are stright and the connection feels good, earths good etc
soooooo what esle can i try
thanks
ian
the problem i get is the display fades in and out, so where you have all the display in black with the green back lit display, the black fades out so you cant see it.
some times it fads a few shades darker, then returns to normal, sometimes it goes so you cant see it at all.
i have tried replugging it back into the ecu, all the pins are stright and the connection feels good, earths good etc
soooooo what esle can i try
thanks
ian
#5
Scooby Regular
Join Date: Apr 2007
Location: East Sussex - www.polarperformance.co.uk
Posts: 359
Likes: 0
Received 0 Likes
on
0 Posts
They do this with heat as mine goes dark in the summer when it's exposed to high temps in the cabin.
It's not something simple like you have the heater on and it's blowing direct at the controller is it ????
It's not something simple like you have the heater on and it's blowing direct at the controller is it ????
Thread
Thread Starter
Forum
Replies
Last Post