removing downpipe on a classic
#1
removing downpipe on a classic
Already undone two bolts on the heatshield but there is another under the intercooler. How many bolts do i need to remove to lift the intercooler to get at the other bolt on the heatshield?
cheers for any help
cheers for any help
#3
there should be 3 bolts on heatshield. you shouldnt have to undo the intercooler to get to the one down the side "i didnt". then there are 4 nuts to undo to get the cat off.have to take the cat off to get the front pipe going to the turbo as there is a bolt that you wont get to without removing the cat.
hope that helps you
#4
Scooby Regular
Join Date: Oct 2005
Location: Swansea
Posts: 643
Likes: 0
Received 0 Likes
on
0 Posts
so much easier to take the intercooler off, only a few bolts and clips, to have space to undo the bolts holding the downpipe. chances are they are very tight. not a hard job really but saves time and knuckle skin trying to work around parts.
Thread
Thread Starter
Forum
Replies
Last Post
aaron_ions
General Technical
1
17 September 2015 10:42 AM