Rough Idea of how much Bhp I'm running?
17 August 2007, 11:34 PM
#1
Scooby Regular
Thread Starter
Join Date: Sep 2006
Location: cambrdgeshire
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
Rough Idea of how much Bhp I'm running?
1994 WRX RA
ESL Chip Running 1.1 bar
Forged pistons 92.5mm rebored from zen
ARP head studs fitted
Tripple layer 1.6MM head gaset
NGK PRF7B PLUGS...
ACL Race bearings
Exedy Racing clutch
3" Straight through exhaust system
HKS Induction
Walbro 255lph fuel pump (standard fuel reg)
Always run on V Power with Millers Octane booster
Strange thing is during my rebuild they found there to be 2 different heads on it? 1 a hydralic tapet setup the other a manual! Its runing with that now with no trouble but I'm guessing it was rebuilt before now
ESL Chip Running 1.1 bar
Forged pistons 92.5mm rebored from zen
ARP head studs fitted
Tripple layer 1.6MM head gaset
NGK PRF7B PLUGS...
ACL Race bearings
Exedy Racing clutch
3" Straight through exhaust system
HKS Induction
Walbro 255lph fuel pump (standard fuel reg)
Always run on V Power with Millers Octane booster
Strange thing is during my rebuild they found there to be 2 different heads on it? 1 a hydralic tapet setup the other a manual! Its runing with that now with no trouble but I'm guessing it was rebuilt before now
Last edited by scoobyhep; 19 August 2007 at 04:35 PM.
18 August 2007, 12:30 AM
#3
Scooby Regular
iTrader: (7)
Join Date: Jun 2001
Location: Stalking Kate Beckinsale
Posts: 4,265
Likes: 0
Received 0 Likes
on
0 Posts
The fact of the matter is that you just don't know with any real guarantees unless you RR her. At my last upgrade session/remap I was told to expect 20+ more bhp than the actually came out with lol 
.
.
18 August 2007, 01:25 AM
#5
Scooby Regular
Join Date: Dec 2005
Location: South West
Posts: 507
Likes: 0
Received 0 Likes
on
0 Posts
ESL Live mapping board + remap
fmic
440cc injectors
uprated MAP sensor
With the rest of your spec you should see 330hp at the top, with an excellent midrange.
fmic
440cc injectors
uprated MAP sensor
With the rest of your spec you should see 330hp at the top, with an excellent midrange.
18 August 2007, 10:34 AM
#6
Scooby Regular
Join Date: Jun 2007
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
sorry 2 jump in
im sort of at the same place tuning wise
esl daughterboard tdo5 uprated fuel pump n regulator
about 2 fit a fmic 440 injectors trhere sat in front of me lol
is the live mapping board different???
can i get the new board n fit my existing eproms??
regards Andy
esl daughterboard tdo5 uprated fuel pump n regulator
about 2 fit a fmic 440 injectors trhere sat in front of me lol
is the live mapping board different???
can i get the new board n fit my existing eproms??
regards Andy
Trending Topics
19 August 2007, 05:40 AM
#8
Scooby Regular
Join Date: Dec 2005
Location: South West
Posts: 507
Likes: 0
Received 0 Likes
on
0 Posts
MAP (not MAF) sensor from a MY97-MY00. I don't think you can transfer the eproms from your current board to the Live Mapping board, it does come with a map on it which may be the same anyway, but to make sure contact Andy Stevens at ESL.
Thread
Thread Starter
Forum
Replies
Last Post
aaron_ions
General Technical
1
17 September 2015 10:42 AM