Cambelt changing
28 June 2007, 11:11 PM
#1
Scooby Regular
Thread Starter
Join Date: Dec 2006
Posts: 804
Likes: 0
Received 0 Likes
on
0 Posts
Cambelt changing
When chaging the cambelt i believe i need to change the other to belts aswell, i have them on the way soon thanks to a fellow scoobynetter and am going to order a cambelt of fleabay soon, was weondering if i need anything else to get them fitted? am getting them done at my local garage and wondered if there were and nuts/bolts/screws etc i need to get for them aswell or just the belts?
many thanks
dave
many thanks
dave
02 July 2007, 11:57 PM
#3
Scooby Regular
Join Date: Sep 2000
Location: Deepest Darkest Dorset!!
Posts: 10,011
Likes: 0
Received 1 Like
on
1 Post
Assuming the idlers are ok, then belts alone is all you'll need.... you could change the front crank seal while you're there if you felt like it.....
It's not compulsory to change the auxillary belts, but never a bad idea.... and personally i would only ever use a subaru belt..... not an ebay jobbie, but it could be the same belt with a different name on it!!
It's not compulsory to change the auxillary belts, but never a bad idea.... and personally i would only ever use a subaru belt..... not an ebay jobbie, but it could be the same belt with a different name on it!!
03 July 2007, 10:26 AM
#4
Scooby Regular
Join Date: Oct 2003
Location: East Yorkshire
Posts: 1,966
Likes: 0
Received 0 Likes
on
0 Posts
One of my OE auxiliary belts (03STi) has Mitsubishi written on the back. The insult! Scoobyclinic didn't see the need to change them on my car when they did my cambelt recently and they look OK at 47000 miles.
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM