New Boost Gauge - cabling options?
#1
New Boost Gauge - cabling options?
Evening all, just received the Prosport Boost Gauge i bought off a fellow Scoobynetter.
Im pretty sure what / where to put the vacuum hose but not sure what to do with the other cables.
Its got -
1 Orange cable that needs connecting to 12v for lighting.
1 Black cable to connect to a good ground.
1 Red cable labelled 12v Ignition Switch ( + ).
Where do i connect these up to? Also can i just splice into existing cables or do i need to get the soldering iron out and stuff like that?
Thanks
Adam
Im pretty sure what / where to put the vacuum hose but not sure what to do with the other cables.
Its got -
1 Orange cable that needs connecting to 12v for lighting.
1 Black cable to connect to a good ground.
1 Red cable labelled 12v Ignition Switch ( + ).
Where do i connect these up to? Also can i just splice into existing cables or do i need to get the soldering iron out and stuff like that?
Thanks
Adam
#2
Be Carefull!!
Safest place 2 get all the wiring is from off back of radio. This way ull b sure not 2 disturb ne sensor/ ecu wiring. N yes!!! get the iron out u wouldnt wanna catch fire. That would b 1 nasty burn out
Thread
Thread Starter
Forum
Replies
Last Post
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM