Turbo's
#1
Scooby Regular
Thread Starter
Join Date: Apr 2007
Location: Always in BP petrol stations
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
Turbo's
What turbo would be best to replace my TD05?
I'm not afraid of some hard work so front entry is ok
just after some advice
my car is an version 2 Sti currently running 1.2 bar boost soon to have a front mount, walbro 255 fuel pump and regulator
I'm not afraid of some hard work so front entry is ok
just after some advice
my car is an version 2 Sti currently running 1.2 bar boost soon to have a front mount, walbro 255 fuel pump and regulator
#2
Scooby Regular
Join Date: Dec 2002
Location: devon
Posts: 2,944
Likes: 0
Received 0 Likes
on
0 Posts
what's your goals ?
ie.power.
vf34 or 35 will make around 330 - 350 , some more,some less depending on supporting mods, spool quite well
or a td05/18g will make a bit more with a bit more lag
you have got a stand alone ecu i take it ? apexi,link,motec , similar
ie.power.
vf34 or 35 will make around 330 - 350 , some more,some less depending on supporting mods, spool quite well
or a td05/18g will make a bit more with a bit more lag
you have got a stand alone ecu i take it ? apexi,link,motec , similar
#3
Scooby Regular
Thread Starter
Join Date: Apr 2007
Location: Always in BP petrol stations
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
I am not after huge horsepower but would like a little more
I am running a standard ecu with a mines chip
don't want a lot of lag as I think it spoils the drive
I am running a standard ecu with a mines chip
don't want a lot of lag as I think it spoils the drive
#4
Former Sponsor
iTrader: (3)
Join Date: Jan 2007
Location: London
Posts: 1,584
Likes: 0
Received 0 Likes
on
0 Posts
get urself a apexi power fc,550cc injectors, walbro fuel pump and a fmic and your existing TD05 will make 350bhp, it will be boosting a safe 1.4bar, i am currently running this setup on my 93 wrx with standard internals and its used as a everyday car
Thread
Thread Starter
Forum
Replies
Last Post