subaru_uk_2002

Hi,

I have a Turbo 2000 1999 model saloon.
Have recently had some engine work done and changed the heads and the battery has been changed.

When we try and start the car now its not ticking over (not engine problem) seems as if the immobiliser has kicked in.
There is no seperate alarm fob for the car just the single key.
Any ideas how we might be able to overide or reset the immobiliser?

Bubbaroo

do you have a keypad inside the glovebox?

subaru_uk_2002

fraid not there isn't

subaru_uk_2002

bump .. any ideas with this one.
I`have bought the car recently from salvage and have been told by main dealer that there is defo a key pad int h ecar. where are the best places to look to find the keypad?

If i do have a keypad what should i do?
I fi havent got the keypad what are my options?

cookstar

iTrader: (6)

right hand side of your steering wheel and down theres a pull out compartment, in this you will/should find the keypad


Go and look now

Bubbaroo

if you find the keypad you will have to get the pin code for it, These were supplied with the vehicle when the alarm was fitted. usually not kept in or on the car for obvious reasons.

subaru_uk_2002

Thanks
Found the keypad.

No idea what the code was set to and there is no way to find out.

What do i need to do?

subaru_uk_2002

any idea what options i have?
I bought the car from a salvage yard and cant go tot he main dealer for the code because its going to take 6 weeks for the log book to come through and without the logbook the dealer isn't going to give me the code.

Is there antother way to re-set the code?

I remember seeing some sigma alarm fobs on ebay that allow you to re-set the immboliser, do these work and is it worth getting?

Bubbaroo

u will have to wait for the log book im afraid.

subaru_uk_2002

about a month ago i remember seeing some blue sigma alarm fobs on ebay for sale. With them it had instructions on how to re-set the immobiliser.
I cannot find them anymore on ebay for some reason .. any idea what this may have been?

Bubbaroo

i bought a couple of them brand new, still need the pin code to link them to the car.

Dr Who

Take it to a Sigma alarm specialist they can re-code it for you!