simbo

hi all my block is away getting down soon to be a 2.35 next thing is the the heads which are sti 3 that im getting ported and the shims done but might also do the valves at the same time any suggestions on what valves to go for im going to be using a md321t turbo or similair


cheers david

Playsatan

iTrader: (2)

Would have thought you could get away with standard valves on that turbo.

I've got standard valves on my 2.33, sti 5 heads (non ported) and a rotated garrett 30/40r. If it ***** itself I'll let you know.

Scoobyslammed

Another 2.35 owner running standard version 4 heads... with a Garret Hybrid turbo supplied by Andy Forrester...
Spend the money elsewhere...

renno rannes

Ive just finnished my 2.35 ( nxt week ) and although Im running lowish power for the moment I still replaced all the standard valves with Supertech ones, even though im sure the standard ones would have been fine at my level. Think im right in saying IF you drop a valve thats your expensive 2.35 scraped. For the extra few hundred quid id much prefer to have that piece of mind AND when I do go further I wont have to take the heads off again.

BUT I KNOW ITS OVERKILL BEFORE SOMEONE HAS A GO

Renno

simbo

mixed thoughts on this then.

do you get Supertech valves to fit in to sti 3 heads or do you need to change other bits too?

renno rannes

Im not sure, I think they only make 99- and up. There was another post here thats missing now

Jolly Green Monster got ones for his car made AFAIK so give him a shout. Or Paul in Zen about Supertech.

simbo

think they would be worth it https://www.scoobynet.com/scooby.php...o&photoid=4794

https://www.scoobynet.com/scooby.php...o&photoid=4795