RRE

Hi all,

I have just recieved a set of what is supposed to phase 1 heads and have a question. My current heads on my 94 2.0 Turbo have two bolts holding the coilpacks, but the heads I have just recieved only have one. Can anybody help me out here? Will these heads fit my car?

http://www.eilersen.net/subaru/head_01.jpg

http://www.eilersen.net/subaru/head_02.jpg

http://www.eilersen.net/subaru/head_03.jpg

Another thing. When buying gaskets for these heads (I need all cover gaskets and the two head gaskets), then what model should I buy gaskets for?

Thanks in advance

Rasmus

tronlc

Thats the same as on my 95 WRX mate.

RRE

And yours is a phase 1? Do you have one or two bolts holding the coilpack? What I am after is, do I need different coilpacks than my current two bolt version?

tronlc

Well I know its got a phase one inlet system so I guess its phase one all around!

It is just one bolt that holds the coil pack on, same as the photos you have posted mate...

RRE

OK, so I guess I'll need other coilpacks to make them fit :-( Anybody know where to get these or if i can use my existing two bolt version?

tronlc

I know you can buy them from the likes of zen, graham goode etc for about £40-£50 each.... Not sure if u can butcher yours to fit though....

RRE

OK thanks tronic. Does anybody know if I can make the two hole versions fit?

Scott.T

iTrader: (2)

2 bolts are legacy, so sounds like you had legacy heads/covers.
single bolts are impreza..

RRE

That sounds strange? I had another set of heads from a seller here on SN a month ago. Those were Impreza heads and they also had the two bolt coilpacks? They were damaged during shipping so I needed to order another set.

The original heads look like this:

http://www.eilersen.net/subaru/orig_head_01.jpg

http://www.eilersen.net/subaru/orig_head_02.jpg

Is it possible for me "just" to buy coilpacks for a phase 1 Impreza or would I need other things changed to make the "new" heads fit?

Thanks

colby

iTrader: (1)

http://www.eilersen.net/subaru/orig_head_01.jpg



there are off a legacy engine


are they off your old engine are were they going on your new engine ??



john

RRE

These are actually supposed to be Impreza heads bought here on SN a month ago. But they are simular to the once currently on my car.

Does anybody know if I can just buy other coilpacks or there is more to is?

And is it for sure that they are Legacy heads?

Scott.T

iTrader: (2)

defo leggy heads. someones probably dropped a leggy engine in it at some point.
post on here UK Legacy Forums (Powered by Invision Power Board) they will confirm the coilpack setup.

RRE

Sounds strange....

OK I'll have to try a post there. If this is just a matter of buying Impreza coil packs I'll do that, I just need to confirm that before I go and buy more stuff that might not fit ;-)

colby

iTrader: (1)

the problem with these heads are they rattle there **** off

RRE

Why do you think I want to change them ;-)

I just need to know if the coilpacks are interchangeable.......and where to source four :-)

RRE

What is the easiest way to confirm if this is a leggy engine? The only number I can find on the engine is EJ20BUB.

RRE

Found a little more. Car anybody tell me what engine this is:

EJ20BUB 58080 M

Scoobybits

single turbo leggy with twin bolt coilpacks..

colby

iTrader: (1)

i think the pistons are difference !! so are you changeing them as well ????

RRE

OK, can you say any more about the engine? The Ej20BUB is a closed deck, right?

Do you know if the coil packs from a phase 1 Impreza will fit or if I can make the Leggy once fit?