Intercooler
#4
Scooby Regular
iTrader: (2)
It will go but you will need to cut metalwork from the intercooler outlet and throttle housing inlet to move it away from the bulkhead. Bash the bulkhaed with a larger hammer to stop it rattling. Cut and blank of the DV outlet as it will fowl the ISCV. Lastly get some sort of samco arrang,ent sorted to use the Pre96 DV.
sounds alot but I think there are a few threads on here that talk about the above in more detail
sounds alot but I think there are a few threads on here that talk about the above in more detail
Trending Topics
#9
Scooby Regular
iTrader: (1)
Join Date: Jun 2006
Location: sussex
Posts: 564
Likes: 0
Received 0 Likes
on
0 Posts
i have an sti silver slanted intercooler which has the larger end tank and the alloy feed pipe with blue samco hose (which flows 50%better then the standard crapy plastic pipe) if your interested . better upgrade then standard as the alloy pipe going into the intercooler is made much bigger then standard and flows much better ! check out - AutoSpeed - Top-Mount Trial - Part One
#13
Scooby Regular
Join Date: Dec 2005
Location: South West
Posts: 507
Likes: 0
Received 0 Likes
on
0 Posts
i have an sti silver slanted intercooler which has the larger end tank and the alloy feed pipe with blue samco hose (which flows 50%better then the standard crapy plastic pipe) if your interested . better upgrade then standard as the alloy pipe going into the intercooler is made much bigger then standard and flows much better ! check out - AutoSpeed - Top-Mount Trial - Part One
Thread
Thread Starter
Forum
Replies
Last Post
Flat4x4-again
General Technical
2
29 September 2015 06:32 PM