AFR Gauge installation - Classic MY97
#1
AFR Gauge installation - Classic MY97
Can someone point me in the right direction? I've bought a swoosh gauge with 4-wires and plan to wire it to the ECU pin-out.
thanks,
Dan
thanks,
Dan
#2
Scooby Regular
Join Date: Oct 2005
Location: Swansea
Posts: 643
Likes: 0
Received 0 Likes
on
0 Posts
red to ign on white to battery +Ve black to Ground and green to signal, i wired the green wire straight to the lambda, black wire if its the 3 wire type.
my gauge reads backwards though, rich when lean and vice versa. ive emailed swoosh directly but no reply as yet. does your gauge read from 10(rich) to 20 (lean)?
good luck
my gauge reads backwards though, rich when lean and vice versa. ive emailed swoosh directly but no reply as yet. does your gauge read from 10(rich) to 20 (lean)?
good luck
#3
red to ign on white to battery +Ve black to Ground and green to signal, i wired the green wire straight to the lambda, black wire if its the 3 wire type.
my gauge reads backwards though, rich when lean and vice versa. ive emailed swoosh directly but no reply as yet. does your gauge read from 10(rich) to 20 (lean)?
good luck
my gauge reads backwards though, rich when lean and vice versa. ive emailed swoosh directly but no reply as yet. does your gauge read from 10(rich) to 20 (lean)?
good luck
Yeah reads the same as that clockwise.
Dan
Thread
Thread Starter
Forum
Replies
Last Post