Inlet manifold
#1
Scooby Regular
Thread Starter
Join Date: Oct 2006
Location: nr,chesterfield
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
Inlet manifold
hi can anybody point me in the right direction?
tryin to get some manifold gaskets but my local subaru dealer dont seem to want to help because its a early import .
can anyone recommend anywhere,also thinking about some manifold spacers
at the same time would these be of any benefit ?
cars running aprox 300 brake
tryin to get some manifold gaskets but my local subaru dealer dont seem to want to help because its a early import .
can anyone recommend anywhere,also thinking about some manifold spacers
at the same time would these be of any benefit ?
cars running aprox 300 brake
#6
You can buy the gaskets from Mark at lateral performance. I am sure he'll know what you're talking about when you call and he is probably a little cheaper. There is also a guy on eBay selling gaskets, they're not OEM but cheap.
I just done the head gasket on my car. While the engine was in bits I fitted manifold spacers. The only reason was because there was someone on here selling them for about £60.
Not sure what diff they'll make? Last year when I had my car rolling roaded I was disappointed in the figures. I was recommended to run some heat reducing stuff like spacers. Will know when the car is mapped again what the crack is
I just done the head gasket on my car. While the engine was in bits I fitted manifold spacers. The only reason was because there was someone on here selling them for about £60.
Not sure what diff they'll make? Last year when I had my car rolling roaded I was disappointed in the figures. I was recommended to run some heat reducing stuff like spacers. Will know when the car is mapped again what the crack is
#7
Scooby Regular
Join Date: Mar 2007
Location: Ellesmere, Shropshire
Posts: 568
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
Scooby Regular
I'm near Norwich and use Constitution Motors (Subaru) there. Sam on the parts desk will go to any length to get what you need and he's now got hold of the Japanese parts CD, with all the Japanese VIN numbers and everything. He often posts out small parts for me. I'm sure he won't mind posting out stuff if you can pay over the phone. 01603 414623
#9
Scooby Regular
Thread Starter
Join Date: Oct 2006
Location: nr,chesterfield
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
cheers for that i will give them a try , anyone got any more advice on fitting manifold spacers , im not going for massive power just wondered if anybody has fitted them noticed any difference ?
#10
Scooby Regular
They're just good heat management. Either you're into that, or you're not. And if you are, there's plenty more areas to keep you busy as well as just spacing the manifold. Worth doing if you've got the whole manifold off anyway.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM