Will a 2002 Wrx Engine, Mate to a 1998 UK Scoob ??
25 March 2007, 09:41 PM
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Apr 2002
Posts: 2,808
Likes: 0
Received 0 Likes
on
0 Posts
Will a 2002 Wrx Engine, Mate to a 1998 UK Scoob ??
02 wrx engine (Complete) to be transplanted into a 1998 UK Scoob.
WIll it fit.
GearBox output shaft ??
Wiring Loom ??
What Turbo is on a 2002 ?
Etc Etc.
What problems would/will i encounter
Thanks V Much
Dean
WIll it fit.
GearBox output shaft ??
Wiring Loom ??
What Turbo is on a 2002 ?
Etc Etc.
What problems would/will i encounter
Thanks V Much
Dean
Last edited by DeanF; 25 March 2007 at 10:15 PM.
26 March 2007, 04:33 PM
#3
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
easy answer is no.. as a fair amount of work..
need to match the rear diff
the wrx02 idle stepper motor won't work with the uk98 ecu..
you cannot fit the idle motor easily to the wrx02 inlet manifold..
you cannot fit the uk98 inlet manifold to the wrx02 engine as the head flanges are different..
you then have issues with ecu map and different turbo, the wrx02 is top feed injectors the uk98 side feed etc..
ideally you need to by a 93~98 (preferably 97 or 98) long engine and use your inlet manifold and turbo..
Simon
need to match the rear diff
the wrx02 idle stepper motor won't work with the uk98 ecu..
you cannot fit the idle motor easily to the wrx02 inlet manifold..
you cannot fit the uk98 inlet manifold to the wrx02 engine as the head flanges are different..
you then have issues with ecu map and different turbo, the wrx02 is top feed injectors the uk98 side feed etc..
ideally you need to by a 93~98 (preferably 97 or 98) long engine and use your inlet manifold and turbo..
Simon
26 March 2007, 10:14 PM
#4
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Apr 2002
Posts: 2,808
Likes: 0
Received 0 Likes
on
0 Posts
easy answer is no.. as a fair amount of work..
need to match the rear diff
the wrx02 idle stepper motor won't work with the uk98 ecu..
you cannot fit the idle motor easily to the wrx02 inlet manifold..
you cannot fit the uk98 inlet manifold to the wrx02 engine as the head flanges are different..
you then have issues with ecu map and different turbo, the wrx02 is top feed injectors the uk98 side feed etc..
ideally you need to by a 93~98 (preferably 97 or 98) long engine and use your inlet manifold and turbo..
Simon
need to match the rear diff
the wrx02 idle stepper motor won't work with the uk98 ecu..
you cannot fit the idle motor easily to the wrx02 inlet manifold..
you cannot fit the uk98 inlet manifold to the wrx02 engine as the head flanges are different..
you then have issues with ecu map and different turbo, the wrx02 is top feed injectors the uk98 side feed etc..
ideally you need to by a 93~98 (preferably 97 or 98) long engine and use your inlet manifold and turbo..
Simon
I did not think it would be straight forward, But just wanted to check & as per usual you give Top Class Info.
Dean
26 March 2007, 10:39 PM
#5
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
of course if you have the complete donar car then you could fit engine complete, loom and ecu but a lot of work.. but I think you were after something involving less hassle.
Simon
Simon
Thread
Thread Starter
Forum
Replies
Last Post
TylerD529
Lighting and Other Electrical
5
20 September 2015 12:10 PM