Which decat downpipe???????
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Jun 2006
Location: sussex
Posts: 564
Likes: 0
Received 0 Likes
on
0 Posts
Which decat downpipe???????
what decat downpipe do you recommend for my94 uk classic ??? must be 3inch to match with my apexi system ! i have heard of open neck and closed neck and others but i havent a clue what it means or what it does performance whys ?? can anyone recommend any ? and rough cost ?
#2
Scooby Regular
iTrader: (2)
are you sure your Apexi system is 3 inch at the downpipe/centre join.
If you have a standard cat pipe on at the moment then it will be 2 1/2 inch where it fits to the centre section.
The majority of decat downpipes are 3 inch then stepping down to 2 1/2 inch at the join.
Open kneck is best, something like a Scoobyworld Ninja, Hayward and Scott, revolution.
Magnex are OK but the twin dump system they use can cause rubbing on the gearbox and there was talk of boost issues (although not witnessed them myself).
If you have a standard cat pipe on at the moment then it will be 2 1/2 inch where it fits to the centre section.
The majority of decat downpipes are 3 inch then stepping down to 2 1/2 inch at the join.
Open kneck is best, something like a Scoobyworld Ninja, Hayward and Scott, revolution.
Magnex are OK but the twin dump system they use can cause rubbing on the gearbox and there was talk of boost issues (although not witnessed them myself).
#3
Scooby Regular
iTrader: (2)
Join Date: May 2000
Location: Class record holder at Pembrey Llandow Goodwood MIRA Hethel Blyton Curborough Lydden and Snetterton
Posts: 8,626
Likes: 0
Received 0 Likes
on
0 Posts
If you really need 3" at the centre flange, H&S do one.
As regards open neck / twindump, do a search, general concensus is open neck is the way to go.
As regards open neck / twindump, do a search, general concensus is open neck is the way to go.
#4
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Jun 2006
Location: sussex
Posts: 564
Likes: 0
Received 0 Likes
on
0 Posts
Yes its 3inch at the join and it also doesnt mate to the standard downpipe 100% . i did have a tsl system before which was 2.5 inch but wanted something a bit louder , and got the apexi cheep of a mate ! will go for an open neck 3inch one then ! cheers
Thread
Thread Starter
Forum
Replies
Last Post
fatboy_coach
General Technical
15
18 June 2016 03:48 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM