Right guys,

Got my AVCR set to 1.5 bar dropping off to 1.4 bar at the top end. (RPM specific)
Learn is OFF.

When in 4th & 5th gear it pulls like a train to the required boost (1.6 bar peak).
When accellarating hard through the gears from a standstill gears 1 to 3 only make 1.4 bar peak.
Am i right in thinking this is because im only getting full load in top gears? if so what can be adjusted to compensate for this?

Is it the feedback settings that need adjusting?

Lee.

 

feedback or up the start duty in gears 1 to 3

 

It is set up by RPM only, with learn OFF so i cant adjust for each gear.

I will try turning up the feedback for gears 1 to 3 though.

Anymore gurus have any thoughts?

 

Having learn gear set to off doesnt mean you cant set start duty for each gear. I would leave it to someone who knows what they are doing matey, andy f or jolly green monster on here.

 

Right, so ive got a choise between the two (F/B speed & start duty)

is there a chance of doing damage if i start adjusting? just checked the feedback speed, they are all set to 2,
would this be a good place to start by changing gears 1 to 3 to a feedback speed of 3??

Start duty for all gears is at 0% at the moment, Hopefully one of the mappers will be along to help out

 

Any more thoughts guys?

 

Bttt

 

bttt

any help would be great