tronlc

Hi all,

Is this intercooler a version 9?? I ask as I may be able to get one to attempt to fit to my 96 classic!

I would also require the samco hose kit mentioned in other threads?

Many thanks!

tronlc

Anyone?!?!?

320bhp

You will have to change the inlet manifold from a gen1 to a later gen2, coz there is'nt enough room for the intercooler between the bulkhead and throttle body!! Its a tight fit!! I'v just fitted an sti8 intercooler to my m/y94 sti and had to cut and reweld the bulkhead to get enough clearance.

tronlc

Cheers for that, is the 2006 STI IC alot bigger than the one u have?

From reading other threads I need to change the dump valve? From which year car would I need one from?

Cheers again

320bhp

the intercooler i used came off a m/y04 sti, so i think the intercoolers are the same size. I could'nt use the standard dump valve as the idle control valve was in the way, so i made a plated pipe to fit the intercooler and run an hks dumpvalve off that.

tronlc

Ah I see, so its not that the standard dump valve wont do the job its just that its in the way?!

KIPS

THIS MAY HELP BUT ITS IN A LATER CAR
https://www.scoobynet.com/projects-4...0-classic.html


https://www.scoobynet.com/projects-4...9-classic.html

KIP