aurin

I want the pro drive camber settings will I need camber bolts front and rear on my version 5 STI RA

Thanks

swtmerce

I believe the rear has no adjustment so you will need at least one bolt to get the rears to equal (if they aren't already). When I had my alignment done (STI v4) the rears were -1.0 and -1.3 so I had the bolt fitted to the -1.0 side so they are now both -1.3.

The fronts are set at -1.0 and this was achieved through the standard adjustment available i.e. no aftermarket bolts required.

RESSE

iTrader: (1)

The settings on my STi RA for sprints and hillclimbs were/are:

Rear Axle
Left -3 35
Right -2 45

Now
Left -1 53
Right -2 05

Front Axle
Left -1 24
Right -2 02

Now
Left -1 49
Right -2 00

Does this help?

Richard

aurin

I've got 4 whiteline camber adjustment bolts just wanted to know if i need to fit 2 on the front before i get eveything setup

thanks

911

If you have the 4 then fit them. You are sure then the technician can dial it all in.

Graham.