jazzymonkey

Been to my local RR today and was told that my car cannot be remapped! Is this right? If so what possibilities are there for ECU mods etc.
Many thanks.

rossyboy

iTrader: (8)

The search button is your friend. Your car's ECU cannot be re-mapped. Type in Apexi or Scoobyecu or ESL or Motec or Link (there are some more but I cannot remember them) into the search facility and enjoy pages upon pages of threads on the topic

jazzymonkey

Thanks, bloody loads of pages. Confused now!
Where is the closest place to me that can sort me out. I live in Norwich.
Many thanks

Chris79

PM jolly green monster - sorted me out with a Power FC for my 1996 STI3.

Cheers Chris

Jolly Green Monster

iTrader: (4)

the original ecu cannot be remapped, but can be replaced with one that can be remapped.

Simon

jazzymonkey

Ok. What sort of thing are we talking about and how much?
Thanks Jason.

Jay m A

iTrader: (2)

Doesn't Scoobyclinic have the facility through Pat to remap via a similar ScoobyECU / ESL style chip?

Scott.T

iTrader: (2)

There is a new live ECU flashing/mapping module that plugs into the OE 1993 - 1996 ECU that allows the ECU to be fully-mapped on the road or rolling road via laptop.

This allows you to go a step further then the plug in ScoobyECU, ESL Adaptor or 27C1028 ECU upgrade.

As you are in Norwich, I recommend that you contact Andy at ESL who is probably your nearest (Huntingdon/Cambridge area) mapper who is using this facility service@enduringsolutions.com.

Tell him I sent you

WRX Blues

Like I used to, alot of guys on here run or ran 96 Sti's using a boost controller, octane booster and a set up/check over for det, etc. Most I know ran happily at 1.2 to 1.4bar and gave flywheel figures of anywhere between 290 and 320bhp (PE rolling road). It may be an option?